Research Papers - Department of Electrical and Electronic Engineering

Permanent URI for this collectionhttps://rda.sliit.lk/handle/123456789/679

Browse

Filters

2013 - 20192

Advanced Search

Filter by

Settings

Author: search.filters.author.Murray, ISubject: search.filters.subject.human gait analysis

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    PublicationOpen Access
    Bluetooth embedded inertial measurement unit for real-time data collection for gait analysis
    (2013 International Conference on Indoor Positioning and Indoor Navigation, 2013-10) Chandrasiri, R; Abhayasinghe, N; Murray, I
    —Inertial Measurement Units (IMUs) are often used to measure motion parameters of human body in indoor/outdoor localization applications. Most of commercially available low-cost IMUs have limited number of sensors and are often connected to a computer by a wired connection (usually by USB). The disadvantage of using wired IMUs in human gait measurement is that, the wires disturb the natural gait patterns. The existing IMUs with wireless connectivity solve that problem, but are relatively high cost. This paper describes the development and testing of a miniature IMU that can be connected to a Windows based computer or an Android based mobile device through Bluetooth. The IMU consists of a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, a temperature sensor, a pressure sensor and an ambient light sensor. Sensors are sampled at a frequency configurable by the user with a maximum set at 100 Hz. Raw sensor data are streamed through the integrated Bluetooth module to the host device for further processing. The IMU is also equipped with a microSD card slot that enables on-board data logging. The power usage of the Bluetooth transmitter is optimized because only the sampled sensor data are transmitted. The windows application can be used to view sensor data, plot them and to store them into a file for further processing. Android application can be used to view data as well as to record data into a file. The small size of the device enables it be attached to any part of lower or upper human body for the purpose of gait analysis. Comparison of the performance of the device with a smartphone indicated that the output of the IMU is comparable to the output of smartphone.
  • Thumbnail Image
    PublicationOpen Access
    Validation of Thigh Angle Estimation Using Inertial Measurement Unit Data against Optical Motion Capture Systems
    (MDPI, 2019-02-01) Abhayasinghe, N; Murray, I; Bidabadi, S. S
    Inertial measurement units are commonly used to estimate the orientation of sections of sections of human body in inertial navigation systems. Most of the algorithms used for orientation estimation are computationally expensive and it is difficult to implement them in real-time embedded systems with restricted capabilities. This paper discusses a computationally inexpensive orientation estimation algorithm (Gyro Integration-Based Orientation Filter—GIOF) that is used to estimate the forward and backward swing angle of the thigh (thigh angle) for a vision impaired navigation aid. The algorithm fuses the accelerometer and gyroscope readings to derive the single dimension orientation in such a way that the orientation is corrected using the accelerometer reading when it reads gravity only or otherwise integrate the gyro reading to estimate the orientation. This strategy was used to reduce the drift caused by the gyro integration. The thigh angle estimated by GIOF was compared against the Vicon Optical Motion Capture System and reported a mean correlation of 99.58% for 374 walking trials with a standard deviation of 0.34%. The Root Mean Square Error (RMSE) of the thigh angle estimated by GIOF compared with Vicon measurement was 1.8477°. The computation time on an 8-bit microcontroller running at 8 MHz for GIOF is about a half of that of Complementary Filter implementation. Although GIOF was only implemented and tested for estimating pitch of the IMU, it can be easily extended into 2D to estimate both pitch and roll.