Faculty of Engineering SCOPUS2
Permanent URI for this collectionhttps://rda.sliit.lk/handle/123456789/4897
Browse
4 results
Search Results
Publication Open Access Nature-Based Urban Drainage Solutions Using Industrial Waste-Incorporated Pervious Concrete Pavements(Multidisciplinary Digital Publishing Institute (MDPI), 2026-03-11) Ratnapala, N; Miguntanna, Nandika; Miguntanna, Nadeeka; Rathnayake, UPervious concrete pavements have gained increasing attention as a sustainable stormwater management solution due to their ability to reduce runoff volume and improve water quality through infiltration. This study investigates the stormwater runoff treatment potential and performance efficiency of pervious concrete pavements incorporating industrial waste materials, namely recycled concrete aggregate (RCA), ceramic waste (C), and waste tires (T), as partial replacements for natural coarse aggregates. Concrete mixes were prepared by replacing 10%, 20%, and 30% of the coarse aggregate volume with each waste material, and the results were compared with normal pervious concrete. Stormwater runoff treatment performance was evaluated by analyzing key water quality parameters, including total suspended solids (TSSs), pH, turbidity, color, and electrical conductivity (EC), using collected urban runoff samples. In addition, mechanical properties (compressive, tensile, and flexural strength) and hydraulic properties (porosity and infiltration rate) were assessed to ensure structural and functional suitability. The results demonstrate that pervious concrete pavements incorporating industrial waste materials exhibit effective pollutant removal while maintaining acceptable mechanical performance in accordance with ASTM standards. Among the investigated pervious concrete types, pavements containing 10% recycled concrete aggregate and 10% ceramic waste showed superior reductions in TSS, turbidity, and color compared to other waste-based and normal pervious concrete mixes. This study demonstrated significant reductions in particulate pollutants (TSS, turbidity, and color), while increases in pH and electrical conductivity highlighted early-age ion leaching from the concrete matrix, underscoring both the treatment benefits and the need for long-term monitoring under realistic deployment conditions. Overall, the findings highlight the potential of industrial waste-based pervious concrete pavements as an environmentally sustainable and effective solution for urban stormwater management.Publication Open Access Uncertainty Reduction in Near Real-time Satellite Precipitation Estimates by Integrating Soil Moisture and Potential Evapotranspiration Using a Machine Learning Approach(Springer Science and Business Media, 2026) Wanniarachchi, S; Sarukkalige, R; Hapuarachchi, H. A. P; Gomes, P.I.A; Rathnayake, UNear-real-time (NRT) satellite precipitation data inherits complex and random errors due to various reasons. The primary objective of this research is to utilize satellite-based precipitation data for hydrological modelling in ungauged areas. The novelty of this study lies in the development of a hybrid stacking-based machine learning framework that integrates hydrologically meaningful predictors: root-zone soil moisture, potential evapotranspiration (PET), and their time-lagged representations to reduce uncertainty in near-real-time satellite precipitation (GSMaP-NRT). Unlike conventional bias-correction approaches that rely primarily on statistical adjustment between satellite and gauge rainfall, this study incorporates physically relevant catchment-state variables to improve predictive skill, with a focus on the Ovens River basin in Australia. A calibrated GR4H hydrological model was used to simulate the runoff of the catchment. Six objective functions were used to evaluate the performance of the approach. The results demonstrate that stacking machine learning algorithms reduces the Mean Absolute Error of GSMaP-NRT satellite precipitation data by 36% and the corresponding modelled streamflow error by 44% for lower precipitation events (< 2 mm/hour). All six objective functions achieved optimal performances within the low precipitation events. However, RMSE remained high for intermediate and heavy precipitation events. The model-estimated major streamflow peaks for the years 2010 and 2016, based on gauged precipitation and ML-corrected satellite precipitation, are 41% and 48% lower than the observed streamflow peaks, respectively. The reasons were the inability of the GR4H model to capture the perfect initial conditions and the x4 time parameter during the calibration process.Publication Open Access QPred: A Lightweight Deep Learning-Based Web Pipeline for Accessible and Scalable Streamflow Forecasting(Tech Science Press, 2026) Makumbura, R.K; Wijesundara, H; Sajindra, H; Rathnayake, U; Kumar, V; Duraibabu, D; Sen, SAccurate streamflow prediction is essential for flood warning, reservoir operation, irrigation scheduling, hydropower planning, and sustainable water management, yet remains challenging due to the complexity of hydrological processes. Although data-driven models often outperform conventional physics-based hydrological modelling approaches, their real-world deployment is limited by cost, infrastructure demands, and the interdisciplinary expertise required. To bridge this gap, this study developed QPred, a regional, lightweight, cost-effective, web-delivered application for daily streamflow forecasting. The study executed an end-to-end workflow, from field data acquisition to accessible web-based deployment for on-demand forecasting. High-resolution rainfall data were recorded with tipping-bucket gauges and loggers, while river water depth in the Aglar and Paligaad watersheds was converted to discharge using site-specific rating curves, resulting in a daily dataset of precipitation, river water level and discharge. Four DL architectures were trained, including vanilla Long Short-Term Memory (LSTM), stacked LSTM, bidirectional LSTM, and Gated Recurrent Unit (GRU), and evaluated using Nash-Sutcliffe Efficiency (NSE), Coefficient of Determination (R2), Root-Mean-Square-Error-Standard-Deviation Ratio (RSR), and Percentage Bias (PBIAS) metrics. Performance was watershed-specific, as the vanilla LSTM demonstrated the best generalisation for the Aglar watershed (R2 = 0.88, NSE = 0.82, RMSE = 0.12 during validation), while the GRU achieved the highest validation accuracy in Paligaad (R2 = 0.88, NSE = 0.88, RMSE = 0.49). All models achieved satisfactory to excellent performance during calibration (R2 > 0.91, NSE > 0.91 for both watersheds), demonstrating strong capability to capture streamflow dynamics. The highest performing models were selected and embedded into the QPred application. QPred was developed as a lightweight web pipeline, utilising Google Colab as the primary execution environment, Flask as the backend inference framework, Google Drive for artefact storage, and Ngrok for secure HTTPS tunnelling. A user-friendly front end utilises range sliders (bounded by observed minima and maxima) to gather inputs and provides discharge data along with metadata, thereby enhancing transparency. This work demonstrates that accurate, context-aware deep learning models can be delivered through low-cost, web-based platforms, providing a reproducible and scalable pipeline for hydrological applications in other watersheds and for practitioners. CopyrightPublication Embargo Enhancing the effectiveness of satellite precipitation products with topographic and seasonal bias correction(Elsevier B.V., 2026-02) Wanniarachchi, S; Sarukkalige, R; Hapuarachchi, H.A. P; Gomes, P.I.A; Rathnayake, UEstimating precipitation distribution across large regions is crucial for understanding water availability, planning infrastructure, and forecasting flood hazards. Traditional gauge-based methods face challenges, particularly with sparse gauge networks. In response, satellite-based, near-real-time (NRT) precipitation data has gained popularity, especially in poorly gauged watersheds. However, satellite precipitation data quality is often compromised by latency, atmospheric complexities, and topographic effects, resulting in nonlinear errors. To overcome the research gap, this study introduces the Heavy Rain Peak Adjustment (HRPA) method alongside the well-established Seasonal Autoregressive Integrated Moving Average (SARIMA) model for satellite precipitation bias correction. The analysis utilised Global Satellite Mapping of Precipitation (GSMaP-NRT) data and hourly precipitation records from 31 rain gauges in the Ovens River region of Australia. On average, the mean residual of observed and GSMaP-NRT precipitation was −0.02 mm. Additionally, the HRPA method yielded better linear regression R2(0.911), NSE (log) (−0.847), and RMSE (0.628) compared to SARIMA. The results indicate that HRPA outperforms SARIMA, particularly at lower elevations, whereas SARIMA struggles at higher elevations, underscoring its limitations in those areas. Additionally, autocorrelation and partial autocorrelation plots for some stations in hilly areas show significant wave-like patterns, indicating greater uncertainty in satellite precipitation estimates over complex terrain. For several stations, autocorrelations at 24 and 48-hour lags suggest a systematic influence of past residuals on future ones, emphasizing the need for further refinement in satellite precipitation correction methods for these regions.