Faculty of Humanities and Sciences

Permanent URI for this communityhttps://rda.sliit.lk/handle/123456789/4205

Browse

Filters

2021 - 20224

Advanced Search

Filter by

Settings

Start date: 2000Subject: search.filters.subject.Photocatalysis

Search Results

Now showing 1 - 4 of 4
  • Thumbnail Image
    PublicationOpen Access
    Efficient photocatalysis of carbon coupled TiO2 to degrade pollutants in wastewater – A review
    (Elsevier, 2022-08-27) Thambiliyagodage, C
    Water pollution caused by human activities is a monumental problem that the world is facing today. The use of polluted water for domestic, industrial, and agricultural applications creates severe hazardous issues. Therefore, decontamination of polluted water is greatly important. The advanced oxidation process is preferred to purify contaminated water as the pollutants are completely degraded to harmless products. TiO2 is the most widely researched photocatalyst due to its chemical stability, low cost and eco-friendliness. However, the use of TiO2 is limited as it is only sensitive to UV range due to its high band gap (3.0 eV for rutile) and the possible electron-hole pair recombination. TiO2 has been coupled with carbon-based materials to enhance photocatalytic activity by enhancing charge separation and visible light absorption. This review summarizes the recent use of TiO2 coupled to activated carbon, carbon nanotubes, graphene derivatives, and g-C3N4 to degrade different pollutants found in water including dyes, pesticides, pharmaceuticals, phenols and heavy metals. The advantages and disadvantages of using each carbon-based material are discussed. Further, the challenges and opportunities associated with all the materials are presented. Finally, recommendations and possible future outlooks are briefed in this review.
  • Thumbnail Image
    PublicationOpen Access
    Efficient Visible-Light Photocatalysis and Antibacterial Activity of TiO2-Fe3C-Fe-Fe3O4/Graphitic Carbon Composites Fabricated by Catalytic Graphitization of Sucrose Using Natural Ilmenite
    (American Chemical Society, 2022-07-26) Thambiliyagodage, C; Usgodaarachchi, L; Jayanetti, M; Liyanaarachchi, C; Kandanapitiye, M; Vigneswaran, S
    Dyes in wastewater are a serious problem that needs to be resolved. Adsorption coupled photocatalysis is an innovative technique used to remove dyes from contaminated water. Novel composites of TiO2-Fe3C-Fe-Fe3O4dispersed on graphitic carbon were fabricated using natural ilmenite sand as the source of iron and titanium, and sucrose as the carbon source, which were available at no cost. Synthesized composites were characterized by X-ray diffractometry (XRD), Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray fluorescence spectroscopy (XRF), and diffuse reflectance UV-visible spectroscopy (DRS). Arrangement of nanoribbons of graphitic carbon with respect to the nanomaterials was observed in TEM images, revealing the occurrence of catalytic graphitization. Variations in the intensity ratio (ID/IG), Laand LD, calculated from data obtained from Raman spectroscopy suggested that the level of graphitization increased with an increased loading of the catalysts. SEM images show the immobilization of nanoplate microballs and nanoparticles on the graphitic carbon matrix. The catalyst surface consists of Fe3+and Ti4+as the metal species, with V, Mn, and Zr being the main impurities. According to DRS spectra, the synthesized composites absorb light in the visible region efficiently. Fabricated composites effectively adsorb methylene blue via π-πinteractions, with the absorption capacities ranging from 21.18 to 45.87 mg/g. They were effective in photodegrading methylene blue under sunlight, where the rate constants varied in the 0.003-0.007 min-1range. Photogenerated electrons produced by photocatalysts captured by graphitic carbon produce O2•-radicals, while holes generate OH•radicals, which effectively degrade methylene blue molecules. TiO2-Fe3C-Fe-Fe3O4/graphitic carbon composites inhibited the growth of Escherichia coli (69%) and Staphylococcus aureus (92%) under visible light. Synthesized novel composites using natural materials comprise an ecofriendly, cost-effective solution to remove dyes, and they were effective in inhibiting the growth of Gram-negative and Gram-positive bacteria.
  • Thumbnail Image
    PublicationOpen Access
    Photocatalytic activity of Go/Fe3O4 fabricated by Sri Lankan graphite under visible light irradiation
    (Faculty of Science, University of Kelaniya, Sri Lanka, 2021-10) Usgodaarachchi, L; Thambiliyagodage, C. J
    Graphene oxide (GO) was synthesized using Sri Lankan naturally available graphite by modified Hummer’s method. Fe3O4 nanoparticles were synthesized successfully by co-precipitation of Fe3+ and Fe2+ in a 2:1 molar ratio via the addition of NH4OH. Magnetically separable GO/Fe3O4 nanocomposite was fabricated by synthesizing Fe3O4 nanoparticles in the presence of GO. The synthesized nanocomposites were characterized by X-ray diffractometry (XRD), Scanning electron microscopy (SEM), and FT-IR spectroscopy. The formation of GO was confirmed by the C(002) peak at 9.39° in the XRD pattern. XRD pattern of the nanoparticles confirms the formation of crystalline Fe3O4 nanoparticles, and the diffraction peak corresponds to graphene oxide disappear in the GO/ Fe3O4 due to the absence of the folded structure of graphene oxide. SEM image of GO shows the crumpled and wrinkled lamellae structure of graphene oxide, and the images of GO/ Fe3O4 show the distribution of Fe3O4 nanoparticles with an average size of 107 nm on GO where the folded structure of GO was not present while restacking of the nanosheets, was observed. FT-IR spectrum of GO shows the presence of polar oxygenated functional groups such as carboxylic acid (-COOH), hydroxyl (-OH), and epoxy (-COC-). The photocatalytic performance of the photocatalysts was evaluated on photodegradation of methylene blue under visible light irradiation. The GO/ Fe3O4 shows better adsorption behaviour and excellent photocatalytic activity where it could be successfully used for three cycles without significant activity loss. The rate constant for the degradation of MB (0.0187 min-1 ) at the first cycle decreased to 0.0101 min-1 at the third cycle. The conversion of MB decreased from 98.31% at the first cycle to 92.15% at the third cycle. The drop in the conversion is only 6.16% going from cycle 1 to 3, which could be due to the accumulation of the MB molecules at the pore structure. The obtained high photocatalytic activity could be due to the enhanced charge separation resulted due to the presence of GO sheets and better interactions between GO and Fe 3O4.
  • Thumbnail Image
    PublicationOpen Access
    Fabrication of Fe2TiO5/TiO2 binary nanocomposite from natural ilmenite and their photocatalytic activity under solar energy
    (Elsevier, 2021-01-01) Thambiliyagodage, C. J; Mirihana, S; Wijesekera, R; Madusanka, D. S; Kandanapitiye, M; Bakker, M
    Heterogeneous photocatalysis is an attractive alternative route to enhance the degradation of environmental pollutants. In this work, we have fabricated Fe2TiO5/TiO2 binary nanocomposites using natural ilmenite via bottom up approach. Synthesized nanocomposites were characterized by X-ray diffractometry, X-ray fluorescence, transmission electron microscopy, Raman spectroscopy, diffuse reflectance UV–Visible spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. These nanoparticles are in the range of 40–70 ​nm and are of type I heterostructure with a band gap of 2.02 ​eV. They are sensitive to visible light and show higher photocatalytic activity under direct solar energy. Photocatalytic activity of Fe2TiO5/TiO2 was assessed using a model textile dye, methylene blue. Over a period of 2 ​h, 76% of methylene blue was photodegraded at a rate of 0.0084 min−1 in the presence of Fe2TiO5/TiO2.