Publication: Correlation of tensile strength of blended cement concrete with specimen dimensions and aggregate size: A practical test review
Type:
Article
Date
2025-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
SLIIT, Faculty of Engineering
Abstract
Test specimen dimensions affect most strength properties of concrete. The existing empirical
relationships in this regard are predominantly based on concrete samples made by using Ordinary
Portland cement (OPC). An important recent trend in Sri Lanka has been the increasing use of blended
cements. This makes it necessary to examine whether the relationships hold for blended cements as well.
In this study, split cylinder tensile strength tests were conducted to determine whether the specimen size
and the tensile strength of concrete prepared using a blended cement (Portland Composite Cement
(PCC)) display relationships similar to OPC. Tests were conducted on specimens using two cement types
– OPC and PCC - and three concrete mix ratios and a range of specimen dimensions to study the effect
of the specimen length (L), diameter (D), and aggregate size (a) on the split cylinder tensile strength (T).
The data was examined using dimensional analysis based on Buckingham's π theorem. A slight
increasing trend was observed in the ratio of split cylinder tensile strength to mean a compressive
strength (T/fc,mean) with an increasing L/D ratio. As for the ratio of the aggregate size to the specimen
diameter (a/D), the analysis showed an increasing trend in T/fc,mean values with an increasing a/D ratio,
indicating a significant correlation between T/fc,mean and a/D. A nonlinear regression analysis was
used in an attempt to determine a functional relationship among the non-dimensional parameters
T/fc,mean, L/D, and a/D. But the differences in the derived relationships for different concrete mixes
were too large for reaching a common relationship. Perhaps this was due to the small number of data
points available. It was seen that relationships established for OPC may hold true for PCC too. However,
the data used was limited in range and more comprehensive further tests should be conducted to confirm
these findings.
Description
Keywords
Concrete, Tensile strength, OPC, PCC, Buckingham’s π theorem, Dimensional analysis
