Faculty of Engineering SCOPUS2

Permanent URI for this collectionhttps://rda.sliit.lk/handle/123456789/4897

Browse

Filters

20262

Advanced Search

Filter by

Settings

Author: search.filters.author.Thamboo, J

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    PublicationEmbargo
    Infill Masonry Strut Models in Reinforced Concrete Frames: Multilevel Reliability Analyses for Predicting In-Plane Responses
    (John Wiley and Sons Inc, 2026-03-10) Raheem, S; Thamboo, J; Mallikarachi, C; Wijesundara, K; Dias, P
    The moment-resisting reinforced concrete (RC) frame infilled with masonry walls is a common form of construction for low- to medium-rise buildings. The importance of considering the infill masonry walls (IMW) in seismic analysis is accentuated due to the interaction between infills and the surrounding frame. Several analytical IMW models have been proposed to model IMW as equivalent diagonal struts, and the appropriateness of those models has been justified through experimental and numerical calibrations. However, the reliability of those analytical models is not well substantiated. Therefore, the reliabilities of five different analytical models have been evaluated herein using the First-Order Reliability Method (FORM). The stochastic uncertainties involved in predicting the in-plane capacities of IMW-RC frames have been incorporated in the reliability analyses. Subsequently, reliabilities of IMW models have been ascertained using experimental data sets compiled at two different scales, namely (1) single story–single bay and (2) multistory IMW-RC frames. 120 experimental data sets of single story–single bay IMW-RC frames tested under in-plane loading and three multistory IMW-RC frames tested on shake-tables were used to assess the reliabilities of IMW models. The results showed that the IMW models considered have predicted the in-plane behavior of IMW-RC frames (single or multistory) to certain levels of accuracy. The predicted reliability indices (β values) of the models vary between 1.03 and 4.13. The reliabilities differ when different aspects of the predictions are being considered, such as peak or ultimate load and drift capacities of single story–single bay frames or base shear and story drift of multistory frames. Therefore, depending on the requirement (strength- or displacement-based design), the IMW models should be selected appropriately to carry out the seismic analyses of IMW-RC buildings.
  • Thumbnail Image
    PublicationEmbargo
    Long-term recovery from the 2004 Indian ocean tsunami in two Sri Lankan east coast municipalities
    (Elsevier Ltd, 2026-01) Thamboo, J; Josiah, R; Saja, A; Salah, P; Rossetto, T; Dias, P
    Sri Lanka was the second most affected country after Indonesia, in the 2004 Boxing Day Indian Ocean tsunami (IOT). A study mission was therefore carried out twenty years after the 2004 IOT to assess the recovery of the affected regions, especially in the Eastern region of Sri Lanka, focusing on two of the most affected municipalities, i.e. Kalmunai and Batticaloa. The social and infrastructure characteristics of resettlements/relocations/new settlements in the affected regions, presence of critical infrastructure, preparedness and early warning systems installed have been assessed. It was observed that similar approaches have been adopted to plan the community relocation in both of these municipalities, while the significant reemergence of residential and commercial developments in the coastal stretches of Kalmunai municipality have been noted. Exposure analyses have revealed that there are still some critical infrastructure situated in the tsunami hazard zones. It can be construed that these municipalities have recovered from the physical losses incurred, and spatial planning is in place for future developments considering the tsunami risk. Challenges and opportunities from their differing geographical contexts appear to have been judiciously handled. However, shortcomings are noted in actual implementation due to various reasons, such as limited resources, availability of funding and preference of communities to live close to their original lands. Improving the resilience of infrastructure by designing against the expected tsunami hazard and multi-hazards, regular verification of the early warning systems and evacuation procedures are emphasized to mitigate the impacts from future tsunami.