Scopus Index Publications

Now showing 1 - 3 of 3

Open Access
Data exploration on the factors associated with cost overrun on social housing projects in Trinidad and Tobago
(Elsevier Ltd, 2024-02) Chadee, A. A; Allis, C; Rathnayake, U; Martin, H; Azamathulla, H. M
This data article explores the factors that contribute to cost overrun on public sector projects within Trinidad and Tobago. The data was obtained through literature research, and structured questionnaires, designed using open-ended questions and the Likert scale. The responses were gathered from project actors and decision-makers within the public and private construction industry, mainly, project managers, contractors, engineers, architects, and consultants. The dataset was analysed using frequency, simple percentage, mean, risk impact, and fuzzy logic via the fuzzy synthetic evaluation method (FSE). The significance of the analysed data is to determine the critical root causes of cost overrun which affect public sector infrastructure development projects (PSIDPs), from being completed on time and within budget. The dataset is most useful to project and construction management professionals and academia, to provide additional insight into the understanding of the leading factors associated with cost overrun and the critical group in which they occur (political factors). Such understanding can encourage greater decisions under uncertainty and complexity, thus accounting for and reducing cost overrun on public sector projects. © 2023
Open Access
Influence of Crumb Rubber and Coconut Coir on Strength and Durability Characteristics of Interlocking Paving Blocks
(MDPI, 2022-07-13) Gamage, S; Palitha, S; Meddage, D. P. P; Mendis, S; Azamathulla, H. M; Rathnayake, U
Interlocking Paving Blocks (IPB) are, nowadays, a widely used construction material. As a result of the surge in demand for IPBs, alternative materials have been investigated to be used for IPBs. This study investigated the strength and durability characteristics (compressive strength, split tensile strength, density, water absorption, skid resistance, and abrasion resistance) of IPBs in the presence of (waste materials) crumb rubber (CR) and coconut coir fibers (CCF). Both compressive and split tensile strength increased in the presence of CCF to a certain extent. CR-based IPBs showcased an increase in skid resistance that satisfied both SLS 1425 and BS EN 1338 specifications. Abrasion depths of CR-based and CCF-based samples show a comparable increase in values when the respective fraction (CR or CCF) increases. Therefore, this research fills the knowledge gap, highlighting the importance of incorporating waste materials (CR and CCF) for the IPB industry rather than open dumping.
Open Access
Computation of Time of Concentration Based on Two-Dimensional Hydraulic Simulation
(MDPI, 2022-10-07) Zolghadr, M; Rafiee, M.R; Esmaeilmanesh, F; Fathi, A; Tripathi, R.P; Rathnayake, U; Gunakala, S. R; Azamathulla, H. M
: Time of concentration (TC) is a parameter in runoff estimation, used to study and design different types of projects in watersheds. Any error in TC calculation leads to an inaccurate estimation of the design flow, which can lead to over-sizing or under-sizing of designed facilities that can have great economic and environmental consequences. Therefore, choosing the correct method to estimate TC is of great importance. Due to the diversity of estimation methods in the literature, the obtained TC values are different. This study aims to present a new method to calculate TC, based on its main concept, i.e., the time required for a water parcel to reach its outlet from the farthest hydrological point of a watershed. A two-dimensional hydraulic simulation was used to model the water parcel travel. A watershed was selected as a case study, and its time of concentration was determined by salt solution tracing. The field measurement results were used for calibration of the numerical simulation model. Meanwhile, 31 empirical relations in the literature were reviewed to determine the most accurate ones. Estimated TC values were compared with the measured ones, and the relative error percentage was used to evaluate the accuracy of the result. In the empirical TC methods, the maximum error was above 300%, and the minimum error was 6.7% for the field studied area. The relative errors of hydraulic simulation outputs were between 3 and 27%. The results showed that only three empirical methods, namely Simas and Hawkins, SCSlag, and Yen and Chow, had the least errors respectively equal to 6.7%, 8.660%, and 13.5%, which can be recommended for the studied area and those with similar hydrological characteristics. On the other hand, hydraulic simulation is also introduced as an efficient method to determine TC which can be used in any desired watershed.

Scopus Index Publications

Browse

Filters

Advanced Search

Filter by

Settings

Sort By

Results per page

Search Results