Scopus Index Publications
Permanent URI for this communityhttps://rda.sliit.lk/handle/123456789/2162
This collection consists of all Scopus-indexed publications produced by SLIIT researchers. Scopus is recognized worldwide as a leading and reputable academic indexing database.
Browse
10 results
Search Results
Publication Open Access Anthocyanin (ATH)-incorporating polyvinylpyrrolidone-ethyl cellulose-(2-hydroxypropyl)-β-cyclodextrin (PVP–EC–BCD) nanofiber-based pH sensor for ocular pH detection during accidental chemical spills(Royal Society of Chemistry, 2026-02-03) Sandaruwan, B; Liyanage, R; Costha, P; Dassanayake, R.S; Wijesinghe, R.E; Herath H.M.L.P.B.; Nalin de S.K.M; de Silva, R.M; Rajapaksha, S.M; Wijenayake, U; Manatunga, D.CThe existing ocular pH detection methods encounter numerous limitations, including low accuracy, poor sensitivity across a wide pH range, and patient discomfort, highlighting the need for innovative approaches. A novel biosensor for ocular pH detection has been developed to assess ocular health and chemical injuries in clinical settings. This study uses the pH-sensitive properties of anthocyanins (ATHs), natural pigments extracted from butterfly pea flowers, to develop a novel pH-responsive nanofiber mat. ATHs are integrated into a polymer blend containing polyvinylpyrrolidone (PVP), ethyl cellulose (EC), and (2-hydroxypropyl)-β-cyclodextrin (BCD) to fabricate electrospun nanofibers. The acquired characterization, employing scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), confirmed the successful fabrication of the ATH-infused nanofibers with a mean diameter ranging from 121 to 396 nm. Four formulations were tested: PVP:EC:BCD:ATH (18 ppm), PVP:EC:BCD:ATH (25 ppm), PVP:EC:BCD:ATH (35 ppm), and PVP:EC:BCD:ATH (50 ppm). Among them, the 50 ppm ATH-incorporating nanofiber mat exhibited the best performance in terms of color clarity, response time, and pH sensitivity. The fabricated 50 ppm ATH incorporating nanofiber mat demonstrated a rapid pH response time of less than 5 seconds (s) while exhibiting a color variation from pink to blue to green across the pH range of 1 to 12, providing a rapid and accurate method for visual pH detection. Based on the color performance of the 50 ppm ATH-incorporating system, a standardized color reference chart was developed to serve as a practical and visual guide for estimating pH levels in clinical applications. Zebrafish toxicity assays were conducted further to validate the safety and biocompatibility of the developed sensor, revealing no significant toxic effects across the range of ATH concentrations.Publication Open Access Bi-directional long short-term memory based ensemble deep learning framework for non-linear steam turbine power forecasting: a biomass fuelled case study(Elsevier Ltd, 2026-04-10) Perera, H; Jayasekara, S; Wijesinghe, R.E; Silva, B. N; Cha, HIn palm oil manufacturing, steam turbines powered by biomass fuel are central to energy generation. However, fluctuating load demands and temporal variations lead to inefficiencies, while limited and variable supply of biomass waste constrains boiler feed flexibility. Current index-based boiler feeding methods overlook actual load demands and waste availability, resulting in significant energy wastage. This study presents a novel ensemble deep learning model combining Bidirectional Long Short-Term Memory (Bi-LSTM) and Gated Recurrent Units (GRU) with Attention Layers, trained on an eight-year operational dataset with structured preprocessing and feature selection, to forecast steam turbine power generation. The model captures complex non-linear temporal patterns more effectively than conventional and standalone ML models, achieving a Root Mean Square Error (RMSE) of 0.0684, Mean Absolute Error (MAE) of 0.0414, and an R-squared (R2) value of 0.9832, which outperformed eight benchmark models by approximately 25% in prediction accuracy. Additionally, the framework incorporates operational parameters such as kVA, total energy, and Fresh Fruit Bunch (FFB) production to dynamically optimise biomass feed rates, balancing energy output with resource availability. This approach minimises energy wastage, reduces grid reliance, and promotes both sustainability and profitability.Publication Embargo High-resolution optical imaging for sustainable fish freshness and safety assessment(Elsevier GmbH, 2026-04) Madhubhashini, M. N; Kahandawala, B.S; Sandaruwan, H.H.P. B; Silva, B.N; Wijenayake, U; Wijesinghe, R.EFish freshness evaluation is crucial to ensure consumer safety, and rapid assessment is essential for effective and accurate quality control. To overcome the limitations of the gold standards, such as lack of structural depth information, high-time consumption, and labor-intensiveness, high-resolution Optical Coherence Tomography (OCT) was employed for real-time monitoring of fish freshness non-invasively. Microstructural changes of eye and skin of Indian Anchovies ( Stolephorus indicus ) specimens were considered as the main freshness parameters during refrigeration storage. Both eye and skin tissues exhibited decreased internal scattering, loss of clarity, boundary weakening, and gradual structural degradations through the OCT observations. The quantitatively assessed variance intensity, entropy, energy, and edge density clearly revealed the internal tissue disruption over storage time due to protein denaturation, oxidative damage, and fluid imbalance. The findings of this study indicate that OCT shows an insightful correlation with microbiological and biochemical spoilage processes, enabling the advanced identification of subtle microstructural changes in fish skin and eye, even at a prior stage of deterioration. Such capability offers an objective and rapid freshness evaluation approach that could greatly benefit supply chain management and post-harvest seafood quality monitoring.Publication Open Access Anthocyanin (ATH)-incorporating polyvinylpyrrolidone-ethyl cellulose-(2-hydroxypropyl)-β-cyclodextrin (PVP–EC–BCD) nanofiber-based pH sensor for ocular pH detection during accidental chemical spills(Royal Society of Chemistry, 2026-02-03) Sandaruwan, B; Liyanage, R; Costha, P; Dassanayake, R.S; Wijesinghe, R.E; Herath H.M.L.P.B; Nalin de S.K.M; de Silva, R.M; Rajapaksha, S.M; Wijenayake, UThe existing ocular pH detection methods encounter numerous limitations, including low accuracy, poor sensitivity across a wide pH range, and patient discomfort, highlighting the need for innovative approaches. A novel biosensor for ocular pH detection has been developed to assess ocular health and chemical injuries in clinical settings. This study uses the pH-sensitive properties of anthocyanins (ATHs), natural pigments extracted from butterfly pea flowers, to develop a novel pH-responsive nanofiber mat. ATHs are integrated into a polymer blend containing polyvinylpyrrolidone (PVP), ethyl cellulose (EC), and (2-hydroxypropyl)-β-cyclodextrin (BCD) to fabricate electrospun nanofibers. The acquired characterization, employing scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), confirmed the successful fabrication of the ATH-infused nanofibers with a mean diameter ranging from 121 to 396 nm. Four formulations were tested: PVP:EC:BCD:ATH (18 ppm), PVP:EC:BCD:ATH (25 ppm), PVP:EC:BCD:ATH (35 ppm), and PVP:EC:BCD:ATH (50 ppm). Among them, the 50 ppm ATH-incorporating nanofiber mat exhibited the best performance in terms of color clarity, response time, and pH sensitivity. The fabricated 50 ppm ATH incorporating nanofiber mat demonstrated a rapid pH response time of less than 5 seconds (s) while exhibiting a color variation from pink to blue to green across the pH range of 1 to 12, providing a rapid and accurate method for visual pH detection. Based on the color performance of the 50 ppm ATH-incorporating system, a standardized color reference chart was developed to serve as a practical and visual guide for estimating pH levels in clinical applications. Zebrafish toxicity assays were conducted further to validate the safety and biocompatibility of the developed sensor, revealing no significant toxic effects across the range of ATH concentrations.Publication Embargo Comparative quantifications and morphological monitoring of the topical treatment approach for onychomycosis-affected in vivo toenail using optical coherence tomography: A case study(Elsevier Ltd, 2024-02) Saleah, S.S; Gu, Y; Wijesinghe, R.E; Seong, D; Cho, H; Jeon, M; Kim, JOnychomycosis is one of the most common toenail fungal infections that affect the quality of life of many patients. Long-term and noninvasive monitoring of morphological changes of onychomycosis-affected nail plate aids the medication process and provides comfort for patients. However, existing medical and dermatological imaging methods have various types of limitations in nail investigation due to low resolution, lack of volumetric data, the necessity of highly trained personnel for image analysis, and the variety of protocols. In this study, qualitative monitoring-based quantitative assessments were performed to assess the morphological changes of onychomycosis-affected toenail for 15 consecutive weeks using high-resolution optical coherence tomography (OCT). Layer intensity and surface roughness measuring algorithms were applied to two-dimensional OCT cross-sectional images to detect gradual changes in the morphological structure of the diseased toenail. A depth intensity profile and the angle formed between the nail plate and nail fold were also used to analyze the thickness and shape of the toenail plates, respectively. The quantitative and morphological monitoring results revealed significant changes in the toenail structure before and during the treatment process, confirming the healing of the diseased toenail. Therefore, the proposed noninvasive optical analysis approach can be applied to monitor nail abnormalities and evaluate the process of diseased toenail medicationPublication Embargo Non-destructive morphological screening for the assessment of postharvest storage effect on pears stored with apples using optical coherence tomography(Elsevier GmbH, 2024-04) Luna, J.A; Wijesinghe, R.E; Lee, S.Y; Ravichandran, N.K; Saleah, S.A; Seong, D; Jung, H.Y; Jeon, M; Kim, JThe use of a limited and inadequate storage facility for the storage of multiple food items for an extended period of time results in the loss of structural integrity and freshness while storing fruit in confined single storage without adequate individual packaging methods can result in morphological changes and the degradation of the quality of the fruit. In this study, the effects of postharvest storage on pears co-stored with apples were investigated via non-invasive screening of the structural deformation of pears and the respective anatomical changes of the sub-surface. The anatomical changes were monitored for a prolonged time (12 d) under inadequate and confined storage conditions using swept-source optical coherence tomography (SS-OCT) and the results were comparatively analyzed using appropriately stored specimens. In addition, the OCT cross-sectional images were analyzed for the assessment of the dispersed intensity profile using a customized intensity-based image-processing algorithm. The results revealed the internal morphological variations and corresponding intensity fluctuations, thickness variations, and internal gap formations. This confirmed the potential applicability of OCT as a real-time, non-invasive high-resolution assessment technique for determining fruit quality in diverse environments, such as post-harvest storage and transportation systems.Publication Embargo Corrigendum to “Meta-heuristic optimization based cost efficient demand-side management for sustainable smart communities” [Energy Build. (2024) 113599] (Energy & Buildings (2024) 303, (S0378778823008290),(Elsevier Ltd, 2024-04-15) Silva, B.N; Khan, M; Wijesinghe, R.E; Wijenayake, UThe monetary value of grid electricity is inflating significantly due to the staggeringly broadening gap between electricity demand and supply, which arise from the unceasing growth of consumption demands. Although heuristic optimization based demand side management has its merits, incorporating Ant Colony Optimization remains disputable due to its tendency to converge at a local optimum. Therefore, this work presents a hybridized algorithm of Ant Colony Optimization and Genetic Algorithm, which alleviates the drawbacks of Ant Colony Optimization through Genetic Algorithm. The proposed work promotes sustainable energy utilization simultaneously with demand-side optimization. The performance of the proposed algorithm is compared with no scheduling instance, Ant Colony Optimization based energy management controller, and mutated Ant Colony Optimization based appliance scheduling. The proposed algorithm successfully curtails 35.4% from community peak load demand and achieves 33.67% cumulative cost saving for the community. In other words, comparative analysis confirms the supremacy of the proposed algorithm in terms of minimizing peak load, total cost, peak-to-average ratio, and waiting time, while providing prevailing insights about proposed algorithm as a sustainable solution approach.Publication Open Access Recent Technological Progress of Fiber-Optical Sensors for Bio-Mechatronics Applications(MDPI, 2023-11-07) Abdhul Rahuman, M.A; Kahatapitiya, N.S; Amarakoon, V.N; Wijenayake, U; Silva, B.N; Jeon, M; Kim, J; Ravichandran, N.K; Wijesinghe, R.EBio-mechatronics is an interdisciplinary scientific field that emphasizes the integration of biology and mechatronics to discover innovative solutions for numerous biomedical applications. The broad application spectrum of bio-mechatronics consists of minimally invasive surgeries, rehabilitation, development of prosthetics, and soft wearables to find engineering solutions for the human body. Fiber-optic-based sensors have recently become an indispensable part of bio-mechatronics systems, which are essential for position detection and control, monitoring measurements, compliance control, and various feedback applications. As a result, significant advancements have been introduced for designing and developing fiber-optic-based sensors in the past decade. This review discusses recent technological advancements in fiber-optical sensors, which have been potentially adapted for numerous bio-mechatronic applications. It also encompasses fundamental principles, different types of fiber-optical sensors based on recent development strategies, and characterizations of fiber Bragg gratings, optical fiber force myography, polymer optical fibers, optical tactile sensors, and Fabry–Perot interferometric applications. Hence, robust knowledge can be obtained regarding the technological enhancements in fiber-optical sensors for bio-mechatronics-based interdisciplinary developments. Therefore, this review offers a comprehensive exploration of recent technological advances in fiber-optical sensors for bio-mechatronics. It provides insights into their potential to revolutionize biomedical and bio-mechatronics applications, ultimately contributing to improved patient outcomes and healthcare innovation.Publication Embargo Comparative quantifications and morphological monitoring of the topical treatment approach for onychomycosis-affected in vivo toenail using optical coherence tomography: A case study(Elsevier, 2023-10-19) Saleah, S. A; Gu, Y; Wijesinghe, R.E; Seong, D; Cho, H; Jeon, M; Kim, JOnychomycosis is one of the most common toenail fungal infections that affect the quality of life of many patients. Long-term and noninvasive monitoring of morphological changes of onychomycosis-affected nail plate aids the medication process and provides comfort for patients. However, existing medical and dermatological imaging methods have various types of limitations in nail investigation due to low resolution, lack of volumetric data, the necessity of highly trained personnel for image analysis, and the variety of protocols. In this study, qualitative monitoring-based quantitative assessments were performed to assess the morphological changes of onychomycosis-affected toenail for 15 consecutive weeks using high-resolution optical coherence tomography (OCT). Layer intensity and surface roughness measuring algorithms were applied to two-dimensional OCT cross-sectional images to detect gradual changes in the morphological structure of the diseased toenail. A depth intensity profile and the angle formed between the nail plate and nail fold were also used to analyze the thickness and shape of the toenail plates, respectively. The quantitative and morphological monitoring results revealed significant changes in the toenail structure before and during the treatment process, confirming the healing of the diseased toenail. Therefore, the proposed noninvasive optical analysis approach can be applied to monitor nail abnormalities and evaluate the process of diseased toenail medication.Publication Open Access Label-free visualization of internal organs and assessment of anatomical differences among adult Anopheles, Aedes, and Culex mosquito specimens using bidirectional optical coherence tomography(Elsevier, 2023-08-02) Luna, J.A; Ravichandran, N.K; Saleah, S. A; Wijesinghe, R.E; Seong, D; Choi, K.S; Jung, H.Y; Jeon, M; Kim, JMosquitoes transmit several fatal human diseases and constitute a global threat to the fight against infectious diseases. Thus, it is crucial to identify the diseases transmitted by mosquitoes, analyze their internal organs, investigate the life cycles of the viruses and pathogens they carry, and elucidate the anatomical changes they cause inside the host without dissecting them. Here we have demonstrated a method for label-free visualization of the internal organs of adult Anopheles, Aedes, and Culex mosquitoes using swept-source optical coherence tomography (SS-OCT). To overcome the limitation of depth-dependent signal-to-noise ratio (SNR) reduction, imaging was conducted using a dynamic rotational OCT scanner to acquire images of the top and bottom surfaces of the specimens. The internal structure and organ images of all the mosquito specimens had constant resolvability and higher SNR than in those obtained via conventional OCT. Furthermore, a depth profiling algorithm was developed to obtain quantitative information about the internal organs. Several internal organs, such as the salivary glands, heart, midgut, dorsal and ventral crop, and abdominal ganglia, were precisely identified and analyzed noninvasively using OCT. The average thicknesses of the heart, midgut, dorsal and ventral crop, and abdominal ganglia of Anopheles, Aedes, and Culex mosquitoes were 72.1, 107.3, 87.3, and 63.4 μm, respectively. This study demonstrates the applicability of OCT in entomology research for high-resolution microscopic analysis. The findings of this study can guide future studies requiring nondestructive assessment of internal organs to evaluate the morphological differences among various virus-transmitting mosquito specimens.