Scopus Index Publications
Permanent URI for this communityhttps://rda.sliit.lk/handle/123456789/2162
This collection consists of all Scopus-indexed publications produced by SLIIT researchers. Scopus is recognized worldwide as a leading and reputable academic indexing database.
Browse
10 results
Search Results
Publication Embargo Assessing the Efficacy of Machine Learning Algorithms in Predicting Critical Properties of Gold Nanoparticles for Pharmaceutical Applications(Springer Nature Link, 2025-07-08) Fernando, H; Mohottala, S; Jayanetti, M; Thambiliyagodage, CAu nanoparticles are increasingly used in pharmaceuticals, but their synthesis is costly and time-intensive. Machine Learning can help optimize this process. In this research, eight distinct Machine Learning models were implemented and optimized on a dataset comprising 3000 records of gold nanoparticles. The performance of these models was assessed using four accuracy metrics and the time required for training and inference. The results are promising, with all seven models demonstrating high accuracy and low time requirements. Notably, the XGBoost and Artificial Neural Network models exhibited exceptional performance, with Mean Squared Error values of 0.0235 and 0.0098, Mean Absolute Error values of 0.1021 and 0.0674, Mean Absolute Percentage Deviation values of 0.4945 and 0.3590, R2 scores of 0.9995 and 0.9998, and inference times of 0.0029 and 0.4299 s, respectively. The Explainable Artificial Intelligence analysis of the resulting models revealed some interesting insights into how the models make the predictions and what factors heavily contribute to the nanoparticle AVG_R, allowing chemists to optimize the synthesis for gold nanoparticles better. The key contributions of the research include the design and development of eight Machine Learning models using industry-standard frameworks, the training, tuning, and evaluation of these eight models using five different metrics, and further assessment of these trained models using Explainable Artificial Intelligence. The findings indicate a substantial potential for applying neural networks in the design phase of nanoparticle synthesis, which could lead to significant reductions in both the time and cost required for synthesizing Au nanoparticles for pharmaceutical applications.Publication Embargo Kinetic study of in vitro release of curcumin from chitosan biopolymer and the evaluation of biological efficacy(Elsevier B.V., 2024-09) Wijayawardana, S; Thambiliyagodage, C; Jayanetti, MSustained release of curcumin from the polymeric carrier system chitosan, a natural biopolymer material derived from chitin originated from natural shrimp shell waste, was studied. Six kinetic models, zero order, first order, Korsmeyer–Peppas (KP), Peppas – Sahlin (PS), Higuchi, and Hixson–Crowell, were applied to study the drug release kinetics. The release mechanism of the drug from the curcumin-chitosan composite was evaluated by changing the pH, ionic strength of the release media, and drug concentration. KP and PS models were selected among the studied models to investigate the drug release mechanism from the chitosan biopolymer based on the R2 values (R2 > 0.99). The model constants m in the PS model and n in the KP model stand for the case II relaxation and Fickian diffusion contribution, respectively. The n being < 0.43 in the KP model suggests that the Fickian diffusion governs the drug release. Furthermore, there is a noticeable difference between the values obtained for model parameters m and n in the PS and KP models, indicating that Case II relaxation and Fickian diffusion play crucial roles in the curcumin release mechanism from chitosan. Polymer relaxation has been proven to play a predominant role in releasing curcumin from the composite at lower ionic strengths and higher pH values. Anti-inflammatory activity was tested using the egg-albumin denaturation assay, and the diphenyl-2-picrylhydrazyl assay was carried out to determine the antioxidant activity of the composite. The composite material showed IC50 values of 0.29 mg/ mL and 1.08 mg/ mL for anti-inflammatory and anti-oxidant activities, respectively. The drug composite has shown antibacterial activity against Pseudomonas aeruginosa, Klebsiella pneumoniae, and Staphylococcus aureus, which are highly effective against S.aureus. The resulting inhibition zones for S.aureus were 13.34 ± 0.34 mm, 16.34 ± 0.60 mm, and 13.34 ± 0.73 mm for 5, 10, and 20 mg/ml concentrations, respectively. The drug composite’s minimum inhibitory concentration/ minimum bactericidal concentration ratio for S.aureus, K. pneumoniae, and P.aeruginosa was greater than 4, suggesting that they cause bacteriostatic effects.Publication Open Access Persulfate assisted photocatalytic and antibacterial activity of TiO2–CuO coupled with graphene oxide and reduced graphene oxide(https://www.nature.com, 2024-05-31) Thambiliyagodage, C; Liyanaarachchi, H; Jayanetti, M; Ekanayake, G; Mendis, A; Samarakoon, U; Vigneswaran, SPhotocatalysts of TiO2–CuO coupled with 30% graphene oxide (GO) were hydrothermally fabricated, which varied the TiO2 to CuO weight ratios to 1:4, 1:2, 1:1, 2:1 and 4:1 and reduced to form TiO2–CuO/reduced graphene oxide (rGO) photocatalysts. They were characterized using XRD, TEM, SEM, XPS, Raman, and DRS technologies. TiO2–CuO composites and TiO2–CuO/GO degrade methylene blue when persulfate ions are present. Persulfate concentration ranged from 1, 2, 4 to 8 mmol/dm−3 in which the highest activity of 4.4 × 10–2 and 7.35 × 10–2 min−1 was obtained with 4 mmol/dm−3 for TiO2–CuO (1:4) and TiO2–CuO/GO (1:1), respectively. The presence of EDTA and isopropyl alcohol reduced the photodegradation. TiO2–CuO coupled with rGO coagulates methylene blue in the presence of persulfate ions and such coagulation is independent of light. The catalyst dosage and the concentration of the dye were varied for the best-performing samples. The antibacterial activity of the synthesized samples was evaluated against the growth of Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumonia. Ti:Cu (1:2)-GO and Ti:Cu (1:4)-GO had the highest antibacterial activity against K. pneumoniae (16.08 ± 0.14 mm), P. aeruginosa (22.33 ± 0.58 mm), E. coli (16.17 ± 0.29 mm) and S. aureus (16.08 ± 0.88).Publication Open Access In vitro influence of PEG functionalized ZnO–CuO nanocomposites on bacterial growth(PubMed ID, 2024-01-14) Thambiliyagodage, C; Jayanetti, M; Liyanaarachchi, H; Ekanayake, G; Mendis, M; Usgodaarachchi, LPolyethyleneglycol-coated biocompatible CuO–ZnO nanocomposites were fabricated hydrothermally varying Zn:Cu ratios as 1:1, 2:1, and 1:2, and their antibacterial activity was determined through the well diffusion method against the Gram-negative Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and the Gram-positive Staphylococcus aureus. The minimum inhibitory concentration and the minimum bactericidal concentration values of the synthesized samples were determined. Subsequently, the time synergy kill assay was performed to elucidate the nature of the overall inhibitory effect against the aforementioned bacterial species. The mean zone of inhibition values for all four samples are presented. The inhibitory effect increased with increasing concentration of the nanocomposite (20, 40 and 60 mg/ml) on all the bacterial species except for S. aureus. According to the MBC/MIC ratio, ZnO was found to be bacteriostatic for E. coli and P. aeruginosa, and bactericidal for S. aureus and K. pneumoniae. Zn:Cu 2:1 was bactericidal on all bacterial species. A bacteriostatic effect was observed on E. coli and P. aeruginosa in the presence of Zn:Cu 1:1 whereas, it showed a bactericidal effect on S. aureus and K. pneumoniae. Zn:Cu 1:2 exhibited a bacteriostatic effect on E. coli while a bactericidal effect was observed for E. coli, P. aeruginosa, and K. pneumoniae. The metal oxide nanocomposites were found to be more sensitive towards the Gram-positive strain than the Gram-negative strains. Further, all the nanocomposites possess anti-oxidant activity as shown by the DPPH assay.Publication Open Access Kinetics and Thermodynamics Study of Methylene Blue Adsorption to Sucrose- and Urea-Derived Nitrogen-Enriched, Hierarchically Porous Carbon Activated by KOH and H3PO4(American Chemical Society, 2023-04-27) Liyanaarachchi, H; Thambiliyagodage, C; Lokuge, H; Vigneswaran, SHierarchically porous nitrogen-enriched carbon materials synthesized by polymerization of sucrose and urea (SU) were activated by KOH and H3PO4 (SU-KOH and SU-H3PO4, respectively). Characterization was undertaken and the synthesized materials were tested for their ability to adsorb methylene blue (MB). Scanning electron microscopic images along with the Brunauer−Emmett−Teller (BET) surface area analysis revealed the presence of a hierarchically porous system. X-ray photoelectron spectroscopy (XPS) confirms the surface oxidation of SU upon activation with KOH and H3PO4. The best conditions for removing dyes utilizing both activated adsorbents were determined by varying the pH, contact time, adsorbent dosage, and dye concentration. Adsorption kinetics were evaluated, and the adsorption of MB followed second-order kinetics, suggesting the chemisorption of MB to both SU-KOH and SUH3PO4. Times taken to reach the equilibrium by SU-KOH and SU-H3PO4 were 180 and 30 min, respectively. The adsorption isotherm data were fitted to the Langmuir, Freundlich, Temkin, and Dubinin models. Data were best described by the Temkin isotherm model for SU-KOH and the Freundlich isotherm model for SU-H3PO4. Thermodynamics of the adsorption of MB to the adsorbent was determined by varying the temperature in the range of 25−55 °C. Adsorption of MB increased with increasing temperature, suggesting that the adsorption process is endothermic. The highest adsorption capacities of SU-KOH and SU-H3PO4 (1268 and 897 mg g−1 , respectively) were obtained at 55 °C. Synthesized adsorbents were effective in removing MB for five cycles with some loss in activity. The results of this study show that SU activated by KOH and H3PO4 are environmentally benign, favorable, and effective adsorbents for MB adsorption.Publication Open Access Recent Advances in Chitosan-Based Applications—A Review(MDPI, 2023-03-03) Thambiliyagodage, C; Jayanetti, M; Mendis, A; Ekanayake, G; Liyanaarachchi, H; Liyanaarachchi, SChitosan derived from chitin has gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.Publication Open Access Fabrication of r-GO/GO/α-Fe2O3/Fe2TiO5 Nanocomposite Using Natural Ilmenite and Graphite for Efficient Photocatalysis in Visible Light(MDPI, 2023-01) Usgodaarachchi, L; Jayanetti, M; Thambiliyagodage, C; Liyanaarachchi, H; Vigneswaran, SHematite (α-Fe2O3) and pseudobrookite (Fe2TiO5) suffer from poor charge transport and a high recombination effect under visible light irradiation. This study investigates the design and production of a 2D graphene-like r-GO/GO coupled α-Fe2O3/Fe2TiO5 heterojunction composite with better charge separation. It uses a simple sonochemical and hydrothermal approach followed by L-ascorbic acid chemical reduction pathway. The advantageous band offset of the α-Fe2O3/Fe2TiO5 (TF) nanocomposite between α-Fe2O3 and Fe2TiO5 forms a Type-II heterojunction at the Fe2O3/Fe2TiO5 interface, which efficiently promotes electron-hole separation. Importantly, very corrosive acid leachate resulting from the hydrochloric acid leaching of ilmenite sand, was successfully exploited to fabricate α-Fe2O3/Fe2TiO5 heterojunction. In this paper, a straightforward synthesis strategy was employed to create 2D graphene-like reduced graphene oxide (r-GO) from Ceylon graphite. The two-step process comprises oxidation of graphite to graphene oxide (GO) using the improved Hummer’s method, followed by controlled reduction of GO to r-GO using L-ascorbic acid. Before the reduction of GO to the r-GO, the surface of TF heterojunction was coupled with GO and was allowed for the controlled L-ascorbic acid reduction to yield r-GO/GO/α-Fe2O3/Fe2TiO5 nanocomposite. Under visible light illumination, the photocatalytic performance of the 30% GO/TF loaded composite material greatly improved (1240 Wcm−2). Field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) examined the morphological characteristics of fabricated composites. X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), X-ray fluorescence (XRF), and diffuse reflectance spectroscopy (DRS) served to analyze the structural features of the produced composites. © 2022 by the authors.Publication Open Access Influence of Laboratory Synthesized Graphene Oxide on the Morphology and Properties of Cement Mortar(MDPI, 2023-01) Ganesh, S; Thambiliyagodage, C; Perera, S. V. T. J; Rajapakse, R.K.N.DThe introduction of Graphene Oxide (GO), a nanomaterial, has shown considerable promise in improving the mechanical properties of cement composites. However, the reasons for this improvement are not yet fully understood and demand further research. This study aims to understand the effect of laboratory-produced GO, using Tour’s method, on the mechanical properties and morphology of cement mortar containing GO. The GO was characterized using Fourier-transform infrared spectroscopy, X-ray Photoelectron Spectroscopy (XRD), X-ray powder diffraction, and Raman spectroscopy alongside Scanning electron microscopy (SEM). This study adopted a cement mortar with GO percentages of 0.02, 0.025, 0.03, 0.035, and 0.04 with respect to the weight of the cement. The presence of GO in cement mortar increased the density and decreased the consistency and setting times. At the optimum of 0.03% GO viscous suspension, the mechanical properties such as the 28-day compressive strength, splitting tensile strength, and flexural strength were enhanced by 41%, 83%, and 43%, respectively. In addition, Brunauer–Emmett–Teller analysis indicates an increase in surface area and volume of micropores of GO cement mortar, resulting in a decreased volume of mesopores. The improvement in properties was due to increased nucleation sites, calcium silicate hydrate (CSH) density, and a decreased volume of mesopores.Publication Open Access Efficient photocatalysis of carbon coupled TiO2 to degrade pollutants in wastewater – A review(Elsevier, 2022-08-27) Thambiliyagodage, CWater pollution caused by human activities is a monumental problem that the world is facing today. The use of polluted water for domestic, industrial, and agricultural applications creates severe hazardous issues. Therefore, decontamination of polluted water is greatly important. The advanced oxidation process is preferred to purify contaminated water as the pollutants are completely degraded to harmless products. TiO2 is the most widely researched photocatalyst due to its chemical stability, low cost and eco-friendliness. However, the use of TiO2 is limited as it is only sensitive to UV range due to its high band gap (3.0 eV for rutile) and the possible electron-hole pair recombination. TiO2 has been coupled with carbon-based materials to enhance photocatalytic activity by enhancing charge separation and visible light absorption. This review summarizes the recent use of TiO2 coupled to activated carbon, carbon nanotubes, graphene derivatives, and g-C3N4 to degrade different pollutants found in water including dyes, pesticides, pharmaceuticals, phenols and heavy metals. The advantages and disadvantages of using each carbon-based material are discussed. Further, the challenges and opportunities associated with all the materials are presented. Finally, recommendations and possible future outlooks are briefed in this review.Publication Open Access Fabrication of TiO2 Spheres and a Visible Light Active α‑Fe2O3/ TiO2‑Rutile/TiO2‑Anatase Heterogeneous Photocatalyst from Natural Ilmenite(researchgate.net, 2022-07-26) Usgodaarachchi, L; Thambiliyagodage, C; Wijesekera, R; Vigneswaran, S; Kandanapitiye, MHigh-purity (98.8%, TiO2) rutile nanoparticles were successfully synthesized using ilmenite sand as the initial titanium source. This novel synthesis method was cost-effective and straightforward due to the absence of the traditional gravity, magnetic, electrostatic separation, ball milling, and smelting processes. Synthesized TiO2 nanoparticles were 99% pure. Also, highly corrosive environmentally hazardous acid leachate generated during the leaching process of ilmenite sand was effectively converted into a highly efficient visible light active photocatalyst. The prepared photocatalyst system consists of anatase-TiO2/rutile-TiO2/Fe2O3 (TF-800), rutile-TiO2/Fe2TiO5 (TFTO-800), and anatase-TiO2/Fe3O4 (TF-450) nanocomposites, respectively. The pseudo-second-order adsorption rate of the TF-800 ternary nanocomposite was 0.126 g mg–1 min–1 in dark conditions, and a 0.044 min–1 visible light initial photodegradation rate was exhibited. The TFTO-800 binary nanocomposite adsorbed methylene blue (MB) following pseudo-second-order adsorption (0.224 g mg–1 min–1) in the dark, and the rate constant for photodegradation of MB in visible light was 0.006 min–1. The prepared TF-450 nanocomposite did not display excellent adsorptive and photocatalytic performances throughout the experiment period. The synthesized TF-800 and TFTO-800 were able to degrade 93.1 and 49.8% of a 100 mL, 10 ppm MB dye solution within 180 min, respectively.