Faculty of Humanities and Sciences-Q1
Permanent URI for this collectionhttps://rda.sliit.lk/handle/123456789/5286
Browse
Publication Embargo Boosting CO2-to-C2H4 electrocatalysis on Cu2O with waste-derived porous carbon from coconut shells(Royal Society of Chemistry, 2026) Qin, C; Li, T; Masakorala, G; Zhi, C; Huang, H; Zhou, C; Wang, X; Shen, B; Zhang, Jian-Rong; Zhou, YThis study presents a sustainable strategy to boost CO2-to-C2H4 conversion by constructing Cu–C interfaces using Cu2O nanospheres supported on porous carbon derived from waste coconut shells. The Cu2O–10mgC catalyst achieves a 4-fold increase in FE(C2H4) compared with Cu2O and maintains >40% selectivity for 45 h. In situ spectra reveal enhanced *COLFB coverage, confirming that oxygen-rich functional groups at the Cu–C interface promote C–C coupling. This work demonstrates both the catalytic and economic feasibility of waste-derived carbon supports for efficient CO2-to-C2H4 conversion.Publication Open Access Chitosan-Starch Biocomposite for Enhanced Curcumin Delivery: Kinetic Modeling of pH and Ionic Strength Responsive Release and Evaluation of Biological Efficacy(American Chemical Society, 2026-07-21) Abeywickrama, L; Wijayawardana, S; Thambiliyagodage, C; Jayanetti, MadaraA drug delivery system composed of chitosan and starch was used to deliver curcumin effectively by enhancing its pharmacokinetic properties. The sustained release of the synthesized delivery system was evaluated using a kinetic modeling approach along with its biological efficacy. The SEM analysis confirmed the coupling of starch and chitosan and loading of curcumin into the matrix during synthesis. Crystallographic orientation of the delivery system was confirmed by XRD, and the FT-IR data confirmed the successful loading of curcumin. TG analysis indicated that the increment in decomposition temperature of the composite is due to the incorporation of curcumin into the composite. BET analysis revealed the reduction in the BET surface area and pore volume in the synthesized composite, confirming successful loading. The IC50 values of the curcumin and composite for the DPPH assay were 17.81 μg/mL and 38.77 μg/mL, respectively. Composite material has shown enhanced antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa at 20 mg/mL, with inhibition zones of 15.56 ± 0.29 and 10.11 ± 0.44 mm, respectively. Allium cepa cytotoxicity assay confirmed that all the synthesized materials promote mitosis at 2.5 mg/mL concentration. The pH and ionic strength responsive release of curcumin was studied by fitting the release data into six kinetic models, including Korsemeyer–Peppas (KP) and Peppas–Sahlin (PS), which has not been reported earlier for the synthesized system. The KP and PS models were selected to interpret the release mechanism based on R2. A combination of Fickian diffusion, relaxation and swelling dominates the curcumin release. According to the KP model, quasi-Fickian diffusion is responsible for the release in acidic and alkaline pH, whereas non-Fickian diffusion occurs at pH 6.7. At higher [NaCl], relaxation is responsible for the release (n > 0.43, kD = 0), while a combination of diffusion and relaxation governs the release at lower [NaCl]. These behaviors are related to the chemical composition of chitosan and the release media, where the electrostatic repulsion, protonation and charge screening contribute to curcumin release.Publication Open Access Chitosan-Starch Biocomposite for Enhanced Curcumin Delivery: Kinetic Modeling of pH and Ionic Strength Responsive Release and Evaluation of Biological Efficacy(American Chemical Society, 2026-07-21) Abeywickrama, L; Wijayawardana, S; Thambiliyagodage, C; Jayanetti, MA drug delivery system composed of chitosan and starch was used to deliver curcumin effectively by enhancing its pharmacokinetic properties. The sustained release of the synthesized delivery system was evaluated using a kinetic modeling approach along with its biological efficacy. The SEM analysis confirmed the coupling of starch and chitosan and loading of curcumin into the matrix during synthesis. Crystallographic orientation of the delivery system was confirmed by XRD, and the FT-IR data confirmed the successful loading of curcumin. TG analysis indicated that the increment in decomposition temperature of the composite is due to the incorporation of curcumin into the composite. BET analysis revealed the reduction in the BET surface area and pore volume in the synthesized composite, confirming successful loading. The IC50 values of the curcumin and composite for the DPPH assay were 17.81 μg/mL and 38.77 μg/mL, respectively. Composite material has shown enhanced antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa at 20 mg/mL, with inhibition zones of 15.56 ± 0.29 and 10.11 ± 0.44 mm, respectively. Allium cepa cytotoxicity assay confirmed that all the synthesized materials promote mitosis at 2.5 mg/mL concentration. The pH and ionic strength responsive release of curcumin was studied by fitting the release data into six kinetic models, including Korsemeyer–Peppas (KP) and Peppas–Sahlin (PS), which has not been reported earlier for the synthesized system. The KP and PS models were selected to interpret the release mechanism based on R2. A combination of Fickian diffusion, relaxation and swelling dominates the curcumin release. According to the KP model, quasi-Fickian diffusion is responsible for the release in acidic and alkaline pH, whereas non-Fickian diffusion occurs at pH 6.7. At higher [NaCl], relaxation is responsible for the release (n > 0.43, kD = 0), while a combination of diffusion and relaxation governs the release at lower [NaCl]. These behaviors are related to the chemical composition of chitosan and the release media, where the electrostatic repulsion, protonation and charge screening contribute to curcumin release.Publication Open Access A Comprehensive Investigation of Microplastic Contamination and Polymer Toxicity in Farmed Shrimps; L. vannamei and P. monodon(Springer Nature, 2025-02-20) Jayaweera, Y.U; Hennayaka, H.M.A.I; Herath, H.M.L.P.B; Gajanayake Mudalige, P.K; Mahagamage, M.G.Y.L; Rodrigo, U.D; Manatunga, D.CMicroplastic (MP) pollution poses a significant threat to marine ecosystems, seafood safety, and human health. This study investigates the accumulation of microplastics in two commercially important shrimp species, Litopenaeus vannamei (L. vannamei) and Penaeus monodon (P. monodon), sourced from cluster farming sites in Puttalam, Sri Lanka. Shrimp exoskeletons and edible soft tissues underwent rigorous microplastic analysis, including density separation, alkali digestion, stereo microscopy, and Raman spectroscopy. The results revealed high microplastic contamination, with L. vannamei containing an average of 4.99 ± 1.81 MP particles/g and P. monodon containing 1.87 ± 0.55 MP particles/g. Microplastic sizes varied, with L. vannamei predominantly contaminated with 100–250 µm particles and P. monodon with 500 µm—1000 µm particles. Fiber morphotypes were prevalent in L. vannamei, while blue-colored microplastics were dominant in P. monodon. These comprised polystyrene (PS), nylon 6,6, and polyethylene (PE) which were identified by Raman spectroscopy. Additionally, the study investigated the acute toxicity effects of microplastic polymer combinations using a zebrafish embryo model (FET236 assay). Zebrafish embryos exposed to polyethylene-nylon 6,6 combinations exhibited significant adverse effects on hatching, survival, and heart function at lower concentrations, while polyethylene terephthalate-polystyrene combinations showed no considerable effects. These findings underscore the urgent need for monitoring and managing microplastic contamination in shrimp farming areas. Future research should focus on elucidating the ecological impacts and human health risks associated with microplastic exposure.Publication Open Access Copper-Based Nanoparticles as Precision Nanoantibiotics against Bacterial Blight in Anthurium andraeanum Lind.: Synthesis, Characterization, and Antibacterial Efficacy under In Vitro and In Vivo Conditions(American Chemical Society, 2026-05-05) Wanaguru, S; Jayasinghe, S; Seneviratne, K; Kottegoda, N; Peiris, Sriyani E; Peiris, Colin NThe bacterial blight disease caused by Xanthomonas spp., a dilemma for farmers worldwide. The existing conventional methods have failed to effectively combat the disease. Therefore, it is crucial to focus on developing and implementing more affordable techniques to effectively manage bacterial blight effectively. Herein, we investigated the efficacy of copper-based nanoparticles (Cu NPs) synthesized via three different methods toward controlling bacterial blight disease in Anthurium andraeanum plants. For that, Cu NPs were engineered via chemical, semichemical, and green synthesis approaches. Cu NPs were characterized through scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier-transform infrared (FTIR), and powder X-ray diffraction (PXRD) analysis. Quantitative antibacterial assays revealed that the chemical and green-synthesized Cu NPs exhibited the highest potency, with a minimum inhibitory concentration (MIC) of 31.25 μg/mL and a minimum bactericidal concentration (MBC) of 62.50 μg/mL, whereas the semichemical formulation showed lower activity (MIC = 62.50 μg/mL; MBC = 125 μg/mL). In vitro well-diffusion assays further supported this trend: at 30 ppm, the inhibition zones measured 25 ± 0.81, 15 ± 0.81, and 20.6 ± 0.94 mm for the chemical, semichemical, and green synthesis methods, respectively, compared to 26.3 ± 0.47 mm for the positive control-antibiotic sulfamethoxazole. At in vivo, optimized concentration of 200 ppm, Cu NPs produced via all three methods controlled bacterial blight disease in 90% of treated anthurium plants within 4, 7, and 5 weeks, respectively, without causing phytotoxicity. Disease progression was monitored over 12 weeks by measuring lesion areas, and statistical significance of treatments was determined using two-way analysis of variance (ANOVA). ©Publication Open Access Early Diagnosis and Severity Assessment of Weligama Coconut Leaf Wilt Disease and Coconut Caterpillar Infestation Using Deep Learning-Based Image Processing Techniques(Institute of Electrical and Electronics Engineers Inc., 2025-02-03) Vidhanaarachchi, S; Wijekoon, J. l; Abeysiriwardhana, W. A. S. P ; Wijesundara, MGlobal Coconut (Cocos nucifera (L.)) cultivation faces significant challenges, including yield loss, due to pest and disease outbreaks. In particular, Weligama Coconut Leaf Wilt Disease (WCWLD) and Coconut Caterpillar Infestation (CCI) damage coconut trees, causing severe coconut production loss in Sri Lanka and nearby coconut-producing countries. Currently, both WCWLD and CCI are detected through on-field human observations, a process that is not only time-consuming but also limits the early detection of infections. This paper presents a study conducted in Sri Lanka, demonstrating the effectiveness of employing transfer learning-based Convolutional Neural Network (CNN) and Mask Region-based-CNN (Mask R-CNN) to identify WCWLD and CCI at their early stages and to assess disease progression. Further, this paper presents the use of the You Only Look Once (YOLO) object detection model to count the number of caterpillars distributed on leaves with CCI. The introduced methods were tested and validated using datasets collected from Matara, Puttalam, and Makandura, Sri Lanka. The results show that the proposed methods identify WCWLD and CCI with an accuracy of 90% and 95%, respectively. In addition, the proposed WCWLD disease severity identification method classifies the severity with an accuracy of 97%. Furthermore, the accuracies of the object detection models for calculating the number of caterpillars in the leaflets were: YOLOv5-96.87%, YOLOv8-96.1%, and YOLO11-95.9%.Publication Open Access Fe3O4 Chitosan Nanocomposite as a pH-Responsive Delivery System for Enhanced Delivery of Punica Granatum L. Polyphenols(American Chemical Society, 2025-10-17) Rukshan, R; Rajapaksha, N; Wijayawardana, S; Thambiliyagodage, C; Senevirathne, U; Jayanetti, M; Samarakoon, UPunica granatum extract (PG), consisting of punicalagin, ellagic acid, and gallic acid, was loaded onto an Fe3O4/Chitosan (Fe3O4@Chi) nanocomposite (Fe3O4@Chi-PG) to enhance pharmacokinetic properties. Fe3O4was synthesized via the coprecipitation method and coupled with chitosan in 2% acetic acid solution via glutaraldehyde cross-linking. The presence of interested polyphenols in the pomegranate extract was confirmed by HPLC analysis, and the extract was post-loaded to the nanocarrier. XRD confirmed the crystallographic orientation of the nanocarrier, and SEM analysis confirmed the successful coupling of Fe3O4onto the chitosan surface during the fabrication of Fe3O4@Chi. BET surface area analysis revealed the presence of micro- and mesopores in the synthesized materials. Significant reduction of the BET surface area and the pore volume of Fe3O4@Chi-PG compared to Fe3O4@Chi suggested the loading of the porous network and surface by PG. The presence of vibrational bands corresponding to the functional groups of the relevant bioactive compounds was confirmed via FT-IR analysis. The IC50values of the nanocomposite for DPPH and egg albumin denaturation assays were 18.69 and 257.69 μg/mL, respectively. The PG encapsulation efficiency of Fe3O4@Chi-PG was reported to be 86.44%. The pH-responsive release of the polyphenols was studied by fitting the release data into five kinetic models, including Korsemeyer–Peppas (KP) and Peppas–Sahlin (PS). The KP and PS models were selected to interpret the release mechanism based on the R2≥ 0.95 value. A combination of Fickian diffusion, relaxation, and swelling dominates the polyphenol release. Quasi-Fickian diffusion is responsible for the release in media with pH 1–6.7, whereas anomalous transport occurs at pH 7.4 (n = 0.46) according to the KP model. Polymer relaxation is the dominant mechanism for the release of bioactive compounds at pH 7.4, as exhibited by R/F > 1. However, the contribution of relaxation to the release of polyphenols at pH 2.5, 4, and 5.5 was negligible according to the parameters (kR= 0). Characteristics of chitosan, including protonation and deprotonation of NH2groups, surface charge of Fe3O4, ionization of COOH and OH groups of the polyphenols, and molecular weight of the active compounds, contributed to the differences in the release behavior.Publication Embargo From rote learning to critical inquiry: fostering higher order thinking skills through collaborative questioning in a rural secondary English-medium science classroom(Elsevier Ltd, 2025-12-03) Wijesekera, H.D; Hameed, RFostering higher-order thinking for inquiry-driven learning is a critical priority in Sri Lanka’s English-Medium Instruction (EMI) science classrooms, where examination-oriented learning and English language barriers limit critical thinking and meaningful cognitive engagement. This practitioner interventionist action research (PIAR) examined how to foster higher-order thinking (HOT) in EMI science classrooms in Sri Lanka. Twenty-one eighth-grade students participated in a mixed-method, quasi-experimental single-group pre-test/post-test design. The intervention comprised two strategies: “What If” questioning and “Notice and Wonder” within collaborative groups. Findings revealed a significant improvement in HOT, with students' mean test scores increasing from pre- to post-test. Qualitative analysis of student perceptions and teacher reflections indicated enhanced deeper cognitive engagement by necessitating co-construction of knowledge through peer feedback and increased problem-solving autonomy - shifting students towards a more analytical mindset. Students also demonstrated greater curiosity and willingness to engage with complex scientific concepts. By showing how simple yet intentional strategies can expand learning opportunities in linguistically and resource-constrained EMI contexts, this study contributes to understanding how HOT can be cultivated in environments where rote memorization dominates. The study provides insights into effective pedagogic practices, curriculum design, and education policy. It also suggests that targeted interventions can transform classroom culture by bridging language, content, and thinking skills gaps in science education.Publication Embargo Heterojunction and homojunction engineering on multi-shelled confinement structure for CO2 photoreduction to CH4(Elsevier B.V., 2025-10-15) Yang, X; Yang, R; Lu, X; Cao, Y; Ye, P; Zhang, L; Li, K; Li, Z; Jiang, Y; Liu, J; Zhou, Y; Eroglu, Z; Thambiliyagodage, C; Wu, B; Metin, Ö; Zhou, Y; Zhu, WThe underdeveloped CO2 photo-reduction solid-gas mode still relies on precious metals to produce CH4. Fine-tuned ingenious structure and morphology with nonprecious metal can enable better performance with lower cost. We have synthesized and modified a TiO2 with a three-stage cavity and a three-shelled layer, loaded with In2S3 flakes only on the outermost layer. The porous hollow multi-shelled structure can give a sequence of gas diffusion from inside to outside or vice versa. Due to the confinement effect, products generated by the core can only be transferred from the inside to the outside in a unidirectional manner. The In2S3/TiO2 catalysts exhibited high performance comparable to that of conventional noble metal catalysts (e.g., Au-Ag-Pt), with a selectivity of up to 98.28 % for CH4 and a rate of 296.87 μmol·g−1·h−1 without using any co-catalyst or sacrificial agent. Systematic fundamental characterization, as well as in situ characterization and DFT calculations show that homo-junctions consisting of two crystalline phases of TiO2 contribute to the production of more *Hads and *CO. Desorbed CO can be captured and catalyzed by the outer shell In2S3/TiO2 S-scheme heterojunction during diffusion for methanation via formaldehyde intermediate. A series of photoelectrochemical characterizations also confirms that the In2S3/TiO2 hetero-junction improves light absorption and charge separation efficiency. This work provides insight into the future rational design of hollow semiconductors for artificial photosynthesis systems and selective solar fuel production.Publication Open Access Impact of geographical variation on nutritional and antioxidant properties of Basella alba L. from Sri Lanka(BioMed Central Ltd, 2025-01-27) Dahanayaka, L. W.; Mapa, M. M. S.T; Kadigamuwa, C.C; Udayanga, DBackground: Basella alba L. (Malabar spinach) is a widely consumed leafy vegetable, well known for its nutritional and therapeutic properties. These properties arise from the availability of essential nutrients, phytochemicals, and antioxidant potential, which may vary depending on environmental factors induced by the geographical location. In this study our aim is to investigate the correlation between the geographical location and proximate composition, phytochemical content, and antioxidant activity of B. alba harvested from fifteen locations in Sri Lanka. Results: According to the statistical analysis by ANOVA and Tukey test, the results of proximate analysis confirmed that samples from different locations showed statistically significant variance in nutritional content. Furthermore, phytochemical content and antioxidant potential varied showing a significant difference between locations in total chlorophyll (27.53 to 6.69 µg/g dry weight), carotene (4.54 to 1.15 µg/g dry weight), total flavonoid content (10.54 to 3.94 mg/g dry weight in Quercetin equivalents), total phenolic content (8.33 to 0.46 mg/g dry weight in gallic acid equivalents), 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity (38.03–11.4% inhibition), and ferric ion-reducing antioxidant power (1.23 to 3.76 mg/g dry weight in ascorbic acid equivalents) (p < 0.05). The Pearson correlation showed a strong positive correlation between total phenolic content and antioxidant activity. Principal component analysis indicates the role of antioxidant activity and chlorophyll content in location differentiation, forming distinct clusters. Cluster analysis categorized samples into four groups, linking biochemical traits to agro-climatic zones. The principal component analysis and cluster analysis showed a close relationship between some locations due to their high antioxidant and phytochemical accumulation. Conclusion: This study exhibits the importance of geographical location on the phytochemical profile and antioxidant properties of B. alba. These findings can be used to refine optimal cultivation sites for B. alba to enhance the efficacy of its nutraceutical and pharmaceutical potential.Publication Open Access In vitro influence of PEG functionalized ZnO–CuO nanocomposites on bacterial growth(PubMed ID, 2024-01-14) Thambiliyagodage, C; Jayanetti, M; Liyanaarachchi, H; Ekanayake, G; Mendis, M; Usgodaarachchi, LPolyethyleneglycol-coated biocompatible CuO–ZnO nanocomposites were fabricated hydrothermally varying Zn:Cu ratios as 1:1, 2:1, and 1:2, and their antibacterial activity was determined through the well diffusion method against the Gram-negative Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and the Gram-positive Staphylococcus aureus. The minimum inhibitory concentration and the minimum bactericidal concentration values of the synthesized samples were determined. Subsequently, the time synergy kill assay was performed to elucidate the nature of the overall inhibitory effect against the aforementioned bacterial species. The mean zone of inhibition values for all four samples are presented. The inhibitory effect increased with increasing concentration of the nanocomposite (20, 40 and 60 mg/ml) on all the bacterial species except for S. aureus. According to the MBC/MIC ratio, ZnO was found to be bacteriostatic for E. coli and P. aeruginosa, and bactericidal for S. aureus and K. pneumoniae. Zn:Cu 2:1 was bactericidal on all bacterial species. A bacteriostatic effect was observed on E. coli and P. aeruginosa in the presence of Zn:Cu 1:1 whereas, it showed a bactericidal effect on S. aureus and K. pneumoniae. Zn:Cu 1:2 exhibited a bacteriostatic effect on E. coli while a bactericidal effect was observed for E. coli, P. aeruginosa, and K. pneumoniae. The metal oxide nanocomposites were found to be more sensitive towards the Gram-positive strain than the Gram-negative strains. Further, all the nanocomposites possess anti-oxidant activity as shown by the DPPH assay.Publication Open Access In vitro release kinetics of bioactive compounds (gallic acid, ellagic acid, and eugenol) from chitosan polymer and the bioactivity of herb-loaded chitosan–CuO nanocomposites(Nature Research, 2025-10-13) Ekanayake, G; Wijayawardana, S; Jayanetti, M; Thambiliyagodage, C; Liyanaarachchi, H; Mendis, AThe biological efficacy of nanocomposites comprised of chitosan, CuO nanoparticles, and extracts of Phyllanthus emblica, and Syzygium aromaticum was studied. The study assessed the pH– and ionic strength-responsive controlled release of the bioactive compounds, gallic acid, ellagic acid and eugenol, from the chitosan biopolymer. Release data were fitted into zero-order, first-order, Korsmeyer–Peppas (KP), Peppas–Sahlin (PS), Higuchi, and Hixson–Crowell kinetic models to evaluate the release mechanism. According to KP and PS models (R2 ≥ 0.96), release was governed by quasi-Fickian diffusion (n < 0.43), where the diffusion occurs along with the polymer relaxation and swelling. P.emblica-coated chitosan (PeC) composite exhibited a burst release at acidic media conditions, and a quasi-Fickian diffusion at pH 5.5–7.4. Higher ionic strength caused salting-in effects for PeC in 0.4 M media, resulting in a transiently increased release. In acidic conditions, diffusion-controlled release was observed for S.aromaticum-coated chitosan (SaC) composite, with the optimal release at pH 4 media. Release was facilitated by hydrophobic nanochannels at elevated pH (8.5–10) and ionic strength of 0.5 M NaCl. The PS model’s relaxation contributions were significant at 0.4 M NaCl and 5 mg drug loading. Both composites demonstrated enhanced release at physiological conditions (0.1–0.2 M NaCl, pH 7.4). Sustained release of SaC was achieved in near-neutral/moderate ionic strength media, whereas PeC exhibited sustained release in acid/low ionic strength media. The PeC and SaC composites showed IC50 values of 10.78 µg/mL and 19.27 µg/mL for the DPPH radical scavenging ability, respectively. Recorded IC50 values for the egg albumin denaturation assay were 467 µg/mL and 390.44 µg/mL, respectively. The antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Staphylococcus aureus showed maximum inhibition zones of 11.83 ± 0.06 mm (Chitosan: CuO 1:2), 12.67 ± 0.20 mm (1:4), 16.50 ± 0.09 mm (1:4), and 11.83 ± 0.08 mm (4:1), respectively. Among the herbal-coated samples, SaC exhibited the highest activity of 23.67 ± 2.84 mm against E. coliPublication Open Access Influence of ageing of graphene oxide on the properties and morphology of cement mortar(Nature Research, 2025-12-02) Suganthiny,G; Thambiliyagodage, C; Perera, S. V. T. J; Rajapakse, R. K. N. DPast studies show that Graphene Oxide (GO) enhances the structural properties of cement composites. However, GO reduces its chemical characteristics with ageing. This study determines the effects of the age of commercial and laboratory-produced GO on cementitious composites. The study considered GO of up to 35 weeks of age, and specimens were chemically characterised using various techniques. The ageing effects were evaluated using consistency, initial setting time, compressive strength, splitting tensile strength, and water absorption. The composite’s thermal resistance was also tested. GO was found to have a shelf life of 13 weeks from production to achieve favourable results. The morphology of the cement mortar was studied to determine the reason for the change in performance with GO age. This study confirms that the carbon-to-oxygen ratio (C/O) and the disorder of graphene oxide sheets (ID/IG ratio), along with the number of GO layers, govern the performance of GO-incorporated cement composites. Both ratios increase with GO age. Aged GOs in mortar increased the mean pore radius and reduced the surface area. Mortar samples with aged GOs have ettringite peaks, while early-age GO-containing samples lack ettringite peaks. Despite reduced mechanical performance with age, all mortar samples remained thermally stable at higher temperatures.Publication Open Access Integrated Microalgal–Aquaponic Systems for Enhanced Water Treatment and Food Security: A Critical Review of Recent Advances in Process Integration and Resource Recovery(Multidisciplinary Digital Publishing Institute (MDPI), 2026-01-12) Dodangodage, C.A; Kasturiarachchi, J. C; Wijesekara, I. A; Perera, T.A; Rajapakshe, D; Halwatura, RThe convergence of food insecurity, water scarcity, and environmental degradation has intensified the global search for sustainable agricultural models. Integrated Microalgal– Aquaponic Systems (IAMS) have emerged as a novel multi-trophic platform that unites aquaculture, hydroponics, and microalgal cultivation into a closed-loop framework for resource-efficient food production and water recovery. This critical review synthesizes empirical findings and engineering advancements published between 2008 and 2024, evaluating IAMS performance relative to traditional agriculture and recirculating aquaculture systems (RAS). Reported under controlled laboratory and pilot-scale conditions, IAMS have achieved nitrogen and phosphorus recovery efficiencies exceeding 95% while potentially reducing water consumption by up to 90% compared to conventional farming. The integration of microalgal photobioreactors enhances nutrient retention, may contribute to internal carbon capture, and enables the generation of diversified co-products, including biofertilizers and protein-rich aquafeeds. Nevertheless, significant barriers to commercial scalability persist, including the biological complexity of maintaining multi-trophic synchrony, high initial capital expenditure (CAPEX), and regulatory ambiguity regarding the safety of waste-derived algal biomass. Technical challenges such as photobioreactor upscaling, biofouling control, and energy optimization are critically discussed. Finally, the review evaluates the alignment of IAMS with UN Sustainable Development Goals 2, 6, and 13, and outlines future research priorities in techno-economic modeling, automation, and policy development to facilitate the transition of IAMS from pilot-scale innovations to viable industrial solutions.Publication Open Access Kinetic Study of In Vitro Release of Neem from Chitosan Biopolymer and Assessment of Its Biological Effectiveness(Multidisciplinary Digital Publishing Institute (MDPI), 2025-03-06) Nishshanka, Y; Thambiliyagodage, C; Jayanetti, MThe study examined the sustained release of neem from the polymeric carrier system chitosan by varying the drug content, ionic strength of the release medium, and pH. Six different kinetic models, i.e., Korsmeyer–Peppas (KP), Peppas–Sahlin (PS), Higuchi, Hixson–Crowell, Zero order, and First order were used to investigate the drug release kinetics. Based on the R2 values, the KP and PS models were chosen from the examined models to study the drug release mechanism from the chitosan biopolymer. The values found for model parameters n and m in the KP and PS models differ noticeably, suggesting that Fickian diffusion and Case II relaxation are important components of the neem release mechanism from chitosan. At lower ionic strengths and lower pH values, neem is released from the composite mostly by Fickian diffusion. The diphenyl-2-picrylhydrazyl assay served to assess the composite’s antioxidant properties. The composite’s antioxidant properties ranged from 3.56 ± 1.89% at 10 μg/mL to 51.28 ± 1.14% at 70 μg/mL. The ability of the composite to inhibit the denaturation of egg albumin was also tested and it ranged from 59.68 ± 0.93% at 25 μg/mL to 187.63 ± 3.53% at 1600 μg/mL. The drug composite has exhibited antibacterial activity against Klebsiella pneumoniae, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus, and proved to be highly effective against P. aeruginosa at lower concentrations and against S. aureus at higher concentrations. The resulting inhibition zones for P. aeruginosa at 5 and 10 mg/mL concentrations were 16.5 ± 2.25 mm, and 14.83 ± 0.6 mm, respectively, whereas for S. aureus, it was 16.67 ± 0.33 mm at 20 mg/mL. The neem–chitosan composite’s minimum inhibitory concentration/minimum bactericidal concentration ratio for K. pneumoniae, P. aeruginosa, and S. aureus was greater than 4, suggesting that they trigger bacteriostatic outcomes, whereas for E. coli, it was 4, which means that bactericidal effects were evident.Publication Open Access Persulfate assisted photocatalytic and antibacterial activity of TiO2–CuO coupled with graphene oxide and reduced graphene oxide(https://www.nature.com, 2024-05-31) Thambiliyagodage, C; Liyanaarachchi, H; Jayanetti, M; Ekanayake, G; Mendis, A; Samarakoon, U; Vigneswaran, SPhotocatalysts of TiO2–CuO coupled with 30% graphene oxide (GO) were hydrothermally fabricated, which varied the TiO2 to CuO weight ratios to 1:4, 1:2, 1:1, 2:1 and 4:1 and reduced to form TiO2–CuO/reduced graphene oxide (rGO) photocatalysts. They were characterized using XRD, TEM, SEM, XPS, Raman, and DRS technologies. TiO2–CuO composites and TiO2–CuO/GO degrade methylene blue when persulfate ions are present. Persulfate concentration ranged from 1, 2, 4 to 8 mmol/dm−3 in which the highest activity of 4.4 × 10–2 and 7.35 × 10–2 min−1 was obtained with 4 mmol/dm−3 for TiO2–CuO (1:4) and TiO2–CuO/GO (1:1), respectively. The presence of EDTA and isopropyl alcohol reduced the photodegradation. TiO2–CuO coupled with rGO coagulates methylene blue in the presence of persulfate ions and such coagulation is independent of light. The catalyst dosage and the concentration of the dye were varied for the best-performing samples. The antibacterial activity of the synthesized samples was evaluated against the growth of Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumonia. Ti:Cu (1:2)-GO and Ti:Cu (1:4)-GO had the highest antibacterial activity against K. pneumoniae (16.08 ± 0.14 mm), P. aeruginosa (22.33 ± 0.58 mm), E. coli (16.17 ± 0.29 mm) and S. aureus (16.08 ± 0.88).Publication Open Access Prevalence, nature and impacts of non-sexual online harassment in Sri Lanka: A quantitative analysis(Elsevier Ltd, 2025-10-20) Harasgama, K. S.; Karunasena, K; Senarath, S; Jayamaha, S; Mahingoda, C.B; Deshapriya, WThe objective of this study is to examine the prevalence, nature and impacts of nonsexual online harassment among the youth population in Sri Lanka. Data was collected through a countrywide survey from a cross-sectional sample of 4805 young people. Data was analysed using SPSS software package. Results of this study indicate that 11.7 % of the youth population surveyed had experienced non-sexual forms of harassment in the cyberspace. The analysis also revealed the most common types of harassment experienced, the platform where harassment was committed the most, the most common types of victims and perpetrators, and the impacts of non-sexual online harassment on victims. The findings of this study suggest that Sri Lanka needs to devise targeted policies for combatting non-sexual online harassment, and that it may need to tailor its responses to the needs of each sector.Publication Open Access Production of Carbohydrate-Rich Chlorella sp. Biomass Using Clarified Aquaponics Effluent for Bioethanol Feedstock Applications(Multidisciplinary Digital Publishing Institute (MDPI), 2026-03-26) Dodangodage, C. A; Gamage, G. N; Mallawa, L.C; Kasturiarachchi, J.C; Fernando, K. V; Halwatura, R.H; Perera, T.A; Rajapakshe, S.D; Niyangoda, S.S; Halwatura, R.UThe integration of microalgal cultivation with wastewater streams offers a promising pathway to enhance resource efficiency within circular bioeconomy frameworks. However, the suitability of clarified aquaponics sedimentation effluent for producing carbohydrate-rich microalgal biomass remains insufficiently evaluated, particularly with respect to nutrient recovery and bioethanol-relevant feedstock potential. In this study, clarified aquaponics sedimentation effluent was assessed as a cultivation medium for Chlorella sp. under controlled laboratory conditions. Biomass productivity, nutrient removal performance, and carbohydrate accumulation were systematically evaluated and compared with conventional synthetic medium. Chlorella sp. cultivated in clarified aquaponic effluent achieved a maximum biomass concentration of approximately 2.05 g L−1, exceeding that obtained in Bold’s Basal Medium. Carbohydrate content exceeded 40% of dry weight, indicating suitability for fermentable sugar production. Nitrate and phosphate removal efficiencies greater than 95% were achieved, with mass balance analysis confirming biological assimilation as the primary removal mechanism (~87.4%). This confirms the dual functionality of the system. The effective nutrient assimilation and confirmed the dual functionality of the system as both a biomass production and nutrient recovery process. Comparable performance under diluted and undiluted effluent conditions further indicated that freshwater dilution is not required following clarification. Light saturation was observed at 180–190 μmol m−2 s−1, providing guidance for energy-efficient operation. These findings demonstrate that clarified aquaponics effluent can serve as an effective alternative growth medium for producing carbohydrate-rich Chlorella sp. biomass while enabling nutrient recovery. The estimated bioethanol potential is theoretical, based on stoichiometric conversion assumptions, and experimental fermentation was not conducted. This work provides quantitative evidence supporting the integration of microalgae into aquaponic systems and establishes a foundation for future pilot-scale, techno-economic, and life-cycle assessments.Publication Embargo Sequence dynamics and plastome evolution: decoding the complete chloroplast genome of Oenothera drummondii and comparative analysis within Oenothera (Onagraceae)(Springer Nature, 2025-12-13) An, C; Xu,W; Yao,Y; Li, M; Li, Y; Priyadasrhani S.V.G.N; Elderini, A; Cheng, A; Luo, S; Qin, YOenothera species are increasingly valued for their medicinal and ornamental qualities and serve as important models in classical cytoplasmic genetics research. The genus Oenothera L., one of the largest in the Onagraceae family, includes 18 subsections and two deep phylogenetic lineages, Clade A and Clade B. Analyzing high-quality chloroplast genomes can provide crucial insights into species classification and genus-level evolution. In this study, we report the complete chloroplast genome of Oenothera drummondii Hook., the first species from subsection Raimannia, with a total length of 167,177 bp and a GC content of 39.3%. This genome contains 129 genes and displays a typical quadripartite structure. Combining this genome with data from 16 publicly available chloroplast genomes, we conducted a comprehensive comparative and evolutionary analysis. Our results indicate that Clade B species diverged independently from Clade A species. Within Clade A, species from subsection Muniza form a distinct branch, while O. drummondii clusters closely with species from subsection Oenothera. Phylogenetic analysis correlates well with chloroplast genome structural differences, such as the loss of the infA gene in Clade B species, the expansion of the IR regions in Muniza, and a shared large inversion in the LSC region among Raimannia and Oenothera species. We also identified repeat sequences, six highly variable genes, and positively selected genes among the 17 chloroplast genomes analyzed. These findings offer valuable insights into the evolutionary processes of Oenothera species and provide a foundation for the development of future molecular markers based on the identified genes and structural variations.Publication Open Access The photocatalytic and antibacterial activity of graphene oxide coupled CoOx /MnOx nanocomposites(Elsevier B.V., 2025-02) Liyanaarachchi, H; Thambiliyagodage, C; Jayanetti, M; Ekanayake, G; Wijayawardana, S; Samarakoon, UCoOx and MnOx metal oxide composites were fabricated via co-precipitation varying the Co:Mn (CM) weight ratio as 4:1, 2:1, 1:1, 1:2 and 1:4, and they hydrothermally coupled with 30 wt% of graphene oxide (GO). XRD analysis revealed the presence of Co3O4 and CoO, and Mn2O3 and Mn3O4 phases in pure CoOx and MnOx metal oxides, respectively. The irregularly shaped metal oxide nanocomposites comprised Co3O4, Mn2O3 and Mn3O4 phases and were immobilized on GO. The band gap values of the composites varied in the range of 1.86 – 2.22 eV. The highest photocatalytic activity with a rate constant of 3.5 × 10−3 min−1 was obtained with CMG (1:4). The total removal of MB increased by 55.8 % when CM (1:4) were coupled with GO. The rate of photocatalysis was dramatically increased in the presence of S2O82- and was decreased in the presence of EDTA and isopropyl alcohol. The effect of catalyst dosage was determined by varying the weight to 25, 50, 75, and 100 mg, and the dye concentration was varied in the range of 25, 50, 75 and 100 mg/L. The presence of Pb2+ and Rhodamine B decreased the photocatalytic activity, while it remained the same in the presence of Cl- and PO43- as co-pollutants. The photocatalytic activity of CMG (1:4) was reduced to 72 % upon using the catalyst for five cycles. All the synthesized nanocomposites exhibited greater sensitivity to the Gram-positive strain than the Gram-negative strains.